spacer.png, 0 kB
spacer.png, 0 kB
Home arrow Dyno Tests
Dyno Tests PDF Print E-mail

 

427 SBC with AIRWOLF 245 heads

Engine Specs

4.185 x 3.875
14.5 to 1 compression
solid roller cam 282/292 @ .050 .840 lift
AIRWOLF 245 heads

Dr J's Ported 2925
Dr J's 4150 Carb
Custom CP pistons
Eagle Crank & Rods
GZ vacuum pump



 

 

414 n20 23° Bullet

757 Hp at 8000 RPM
545 ft lbs at 6300 RPM

AIRWOLF 265 Heads
Dr J's Ported 2971 intake
CP Custom Pistons 12.8 to 1 compression
Crower Shaft Rockers Custom
Bullet Roller .850 lift
ProSystems 1050
IS foggers set to 600HP!!

 

 

 

Brian Butler 400 SBC West Coast Super Stock

4.130 bore X 3.75 stroke
CP Bullet Flat top Pistons
Custom Bullet Flat tappet Cam
Crower Shaft Rockers
AIRWOLF 238 Iron heads (EQ casting )
Dr J's Ported Super Victor 2925 Dr J's Custom 4150 GAS carb
1 7/8 dyno headers

 

 

 

Snake Pump Gas 406

646 hp 6500 rpm
570 Ft lbs @ 5100 rpm

4.155 X 3.75
Custom CP pistons 10.6 to 1 compression
Carrillo Rods
AirWolf 220 Heads
Dr J's Ported Victor Jr.
HYD Roller Cam 246/248 @ .050 .640 lift
BG 850 Gold Claw

www.j-performance.com
www.cp-carrillo.com/

 

 

408 Mopar 633hp 562 ft lbs with New AIRWOLF 220 Small Block Mopar heads

4.030 bore X 4 inch stroke
Diamond Pistons 1/16 1/16 3/16 rings Flat top (11.5 to 1compression)
6.123 h beam rod
Crane solid roller 260/266 108 lsa 104 ICL .672 lift with 1.6 rockers
Dr J's Ported Super Victor
Holley Ultra hp 950
NEW AIRWOLF 220 Small Block Mopar heads
Hooker Chassis headers 1 ¾

tested on 91 octane pump gas


 

 

421  SBC Pump Gas Bruiser  Engine Specs

4.155 X 3.875” stroke CP Bullet Flat top Pistons  11.5 to 1 compression .040 quench
Callies  Compstar rods & Crank

Custom Isky hyd roller 258/262 @ .050 .640/.640 lift 108 LSA Comp 1.6 Gold rockers
AIRWOLF  220 heads (Brodix casting) 2.125 intake valves 1.6 exh Dr J's Ported Hurricane intake 
Holley Street HP 950

MSD Billet Distributor  6al box 
Dyno Headers are 1-7/8 to 2  3-1/2 inch collector

 

 

Dr J's pump gas 496 BBC

4.310 bore X 4.25 stroke
probe 18cc dome shelf pistons 11.10 to 1 compression
custom Isky solid roller .750 lift intake .720 lift exhaust
Jesel Sportsman rockers

AirWolf 305 CNC ported oval port heads
109cc chambers

Ported Dart 4150 intake
1150 4500 carb

 

 

 

460 Pump Gas BBC Engine Specs

4.280 X 4” stroke JE SRP Pistons 23cc dome 11 to 1 compression .040 quench
Procomp H-beam rods Factory steel crank

Comp Cams Mega Thumper Hyd roller 243/257 @ .050 .570/.554 lift
107 LSA installed on a 102 ILC
PRW 1.7 stainless rockers

AIRWOLF 305 oval port heads (Brodix casting) 2.25 intake valves 1.88 exh
Edelbrock Performer RPM air gap intake (gasket matched)

Holley Street HP 950
HVH 1 inch spacer
HEI distributor

Dyno Headers are 2-1/8 to 2-1/4 4 inch collector

 

JP's Pump gas 555 Big Block Chevy  Built by Dr. J's Performance 730 hp 710 ft lbs

555 Big Block Chevy Specs
4.560 bore X 4.25 stroke
CP bullet Pistons flat tops( 9.75 to 1 compression)
Eagle Crank & H beam rods
Hyd Roller 248 254 @ .050 112 lsa
.630 lift with 1.7 rockers

Dr J's Ported world Merlin Oval port heads
Ported Dart single plane
850 holley carb

 

 

383 Pump Gas SBC  Engine Specs

383 SBC (4.030 bore x 3.75 stroke) 
One piece rear main GM block
Scat cast steel crank & rods 
KB hypertec pistons (flat top) 
11.5 to 1 compression
Custom HYD roller 244/248 @ .050 .595 lift 112 LSA 
Comp 1.6 rockers 
Top End 
Dr J’s Ported RPM Air Gap 
Dr J’s Competition ported AFR 195 (Comp) heads (resized to 220 cc) 
Increased CSA to 2.54 @ pinch , Resized bowl and reshaped short turn. 
Heads flow 304 cfm @ .600 lift 2.08 intake 1.60 exhaust 
Dr J’s modified Holley 1050 4150.

 

 
spacer.png, 0 kB
spacer.png, 0 kB
spacer.png, 0 kB